Huntron Tracker 3200S

Product Specifications and Features:

• Number of Voltages plus values: 24 voltages: 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2)
• Number of Resistances plus values: 16 resistances: 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low)*, 1.2kΩ (Med 1)*, 26.7kΩ (Med 2)*
• Number of Frequencies plus values: 40 frequencies: 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps
• Range Selection : Stand alone mode: Front panel push buttons and preset LCD buttons, Remote Mode: Controlled by Huntron Workstation
• Display: Color TFT LCD with Touch screen; LED back light
• Pulse Generator Level: 0 to +/- 10V DC or Square wave; Pulse mode width: 2% to 50% duty cycle; Source Resistance: 100Ω; Maximum current: 100mA per channel
• Front Panel Connections: Banana jacks for A/B Test channels and Common; Banana jacks for Pulse Generator outputs (G1, G2); Two 64 pin IDC connectors (can be combined for 128 pins) with selectable Common pin for use with PCB interface cables or IC clips
• Rear Panel Connections: BNC connectors for A/B Test channels and Common (used to interface to Access Prober); AUX connector for Footswitch accessory (included)