MITAS HANOI TECHNOLOGY JSC

Huntron Access DH2 Prober

linhnguyen — Thu, 04 May 2023 09:54:36 +0000

Product Specifications and Features:

Number of Test Heads: 2
Maximum Board Under Test Size: 27″ x 23″ (68.6cm x 58cm)
Maximum Probing Area: 19″ x 12″ (48.3cm x 30.5cm)
Maximum Board Component Height: 4.8″ (12.2cm)
Dimensions: 47” W x 61.5” H x 35.75” D (w/handle) (119.4cm W x 156.2cm H x 90.8cm D)
Cabinet Internal Dimensions: 45″ W x 29″ H x 33″ D (114.3cm W x 73.6cm H x 83.8cm D)
Accuracy and Resolution: 0.0003937″ (±10 microns) for Top Slot (6″ above plate) at 0.00002″ (0.4 microns)

linhnguyen — Thu, 04 May 2023 09:51:53 +0000

Product Specifications and Features:

Number of Test Heads: 1
Maximum Board Under Test Size: 22″ x 23″ (56cm x 58cm)
Maximum Probing Area: 18.2″ x 22.4″ (46.2cm x 56.9cm)
Maximum Board Component Height: 4″ (10cm)
Dimensions: 36″ W x 15.7″ H x 29″ D (91.44cm W x 39.88cm H x 73.66cm D)
Accuracy and Resolution: 0.0007874″ (±20 microns) at 0.0003937″ (10 microns) minimum

linhnguyen — Thu, 04 May 2023 09:29:42 +0000

Product Specifications and Features:

Number of Voltages plus values: 24 voltages: 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2)
Number of Resistances plus values: 16 resistances: 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low)*, 1.2kΩ (Med 1)*, 26.7kΩ (Med 2)*
Number of Frequencies plus values: 40 frequencies: 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps
Range Selection : Stand alone mode: Front panel push buttons and preset LCD buttons, Remote Mode: Controlled by Huntron Workstation
Display: Color TFT LCD with Touch screen; LED back light
Pulse Generator Level: 0 to +/- 10V DC or Square wave; Pulse mode width: 2% to 50% duty cycle; Source Resistance: 100Ω; Maximum current: 100mA per channel
Front Panel Connections: Banana jacks for A/B Test channels and Common; Banana jacks for Pulse Generator outputs (G1, G2); Two 64 pin IDC connectors (can be combined for 128 pins) with selectable Common pin for use with PCB interface cables or IC clips
Rear Panel Connections: BNC connectors for A/B Test channels and Common (used to interface to Access Prober); AUX connector for Footswitch accessory (included)